Broken Garage Door Repair
Advanced Overhead Garage Door Company repairs broken, bent and off-track garage doors, including rollers, hinges, tracks, struts and damaged sections, across the Greater Reno area and Northern Nevada. If your door is crooked or stuck, leave it where it is, keep the opener off, and call 775-356-0444 for a free estimate.

Signs a door is off track or bent
A garage door rides in tracks on both sides, held by rollers. When one side slips out, the door tilts, jams or hangs. The signs are usually easy to spot.
- One side of the door sits higher or lower than the other
- A gap between the door and the frame, or between sections
- Rollers visible outside the track
- A dent or crease across one or more sections
- The door scrapes, binds or stops partway
- A track that looks bowed or pulled away from the wall
- The opener strains, jerks or reverses
Any of these is a reason to stop using the door. A bent section or an off-track roller can make the door twist when the opener pulls it, and the damage grows with each attempt.
What usually breaks and why
Doors wear in predictable places. Rollers, either nylon or steel, turn thousands of times and eventually crack or seize. Hinges flex where the sections meet and can split or loosen. The vertical and horizontal tracks can bend from impact, or open up if their mounting loosens. A reinforcing strut across the top of a section keeps a wide door from flexing, and a bent strut often means the section is also damaged.
Impact is the other main cause. A car backing into a door, a stray ball or a heavy gust can crease a panel and push a track out of line. After a hit, even a door that still moves may be unsafe, so see our page on a door hit by a car. Noise is often the first warning of worn parts; noisy garage door explains what sounds mean.
| Part | Common problem | What the repair involves |
|---|---|---|
| Rollers | Cracked, worn flat or seized | Replace with new nylon or steel rollers |
| Hinges | Split, loose or bent | Replace the hinge and check the section |
| Tracks | Bent or pulled from the wall | Straighten or replace, then realign |
| Strut | Bent across the section | Replace the strut or the section |
| Section | Dented, creased or cracked | Replace the section or the door |
Section replacement or a new door
If one panel is damaged and the rest of the door is sound, replacing that section can be the right fix. It depends on whether we can match the door: a discontinued style, a faded finish or a very old door may not have a section that fits. When the damage is spread across several sections, or the door has been repaired several times, a new door is often the better value. We feature Wayne Dalton doors, and our repair or replace guide sets out how to decide.
You can decide later. We look at the door during the free estimate, explain both options and let you choose.

Why a crooked door must not be forced
It is tempting to push a door back into its track or to press the opener button once more. Please leave it alone. A door that has left its track is no longer supported evenly. The cables, springs and brackets are under tension, and DASMA states that spring systems are dangerous and should be repaired only by trained professionals. Forcing the door can bend it further, release a cable or drop a section.
The safe steps are the short ones: keep the door and the opener out of use, keep people and cars clear, and call. If the door is open, leave it open. A technician will secure it first.
For urgent situations, our emergency repair line is answered 24/7. A frayed or loose cable is a separate repair; see cable and drum repair.
What a visit includes
A qualified, friendly technician examines the whole door, not only the visible damage. Then you get a free estimate, and the repair is usually done in a few hours, depending on where you are. We check the balance, the cables and springs, the tracks and the opener, and test the safety reverse before we leave. We guarantee all our work.
Where we work
We do this work across the Greater Reno area and Northern Nevada, including Reno, Sparks and Spanish Springs, Carson City, Fernley, Fallon, Incline Village, Minden and Gardnerville, Dayton and the South Shore of Lake Tahoe.
Broken Garage Door Repair: Questions
Can you repair a garage door that came off its track?
Yes. We repair off-track doors, replace damaged rollers, hinges and tracks, and realign the door. Please leave moving it to a technician.
Can one damaged section be replaced?
Often, if a matching section is available. If not, or if several sections are damaged, we will explain the new door options at the free estimate.
Is it safe to keep using a bent door?
We recommend stopping. A bent door can bind, twist or drop, and using the opener can add to the damage.
Do you repair commercial doors too?
Yes. We repair residential and commercial doors. See our commercial garage door repair page for business doors.
Do you offer emergency service for a broken door?
Yes. Emergency and same-day service is available 24/7. Call 775-356-0444.
Sources (1)
- DASMA (Door & Access Systems Manufacturers Association): dasma.com/safety-tips/ (checked November 2026)
Contact Us for Quick Job Quotes and More Information.
Call 775-356-0444 or 775-883-0444, or send the form for a free estimate. Emergency and same-day service available 24/7.