Insulated Garage Doors
Advanced Overhead Garage Door Company sells and installs insulated and non-insulated garage doors for homes and businesses in the Greater Reno area and Northern Nevada. We help you choose between insulation types and give you a free estimate; call 775-356-0444.

When does an insulated garage door matter?
An insulated door matters most when the garage is part of the living space. If the garage is attached to the house, if there is a bedroom or office above it, or if you use the garage as a workshop, gym or studio, the door is a large part of the wall and the biggest opening in it. Insulation helps hold temperature in both directions.
For a detached garage used only for storage, or for a commercial building where doors are open much of the day, non-insulated doors are common and perfectly good. We sell and install both. Our commercial page covers specialized coiling, sectional, insulated and non-insulated doors for warehouses, showrooms and other buildings.
Polystyrene or polyurethane insulation?
Most insulated garage doors fall into two groups. Polystyrene is rigid foam, often cut as a panel and fitted inside the steel section. Polyurethane is foamed in place, so it fills the whole section and bonds to the skin.
Wayne Dalton's published door list shows the difference. Its entry-level steel Model 8200, with polystyrene insulation, lists an R-value of 7.4, while its Models 8500/8500AG, which it calls its best insulation, list an R-value of 16.22 and a U-factor of 0.18. Its Classic Steel Models 9100 and 9605 use foamed-in-place polyurethane, which Wayne Dalton says can improve thermal efficiency, block street noise and help the door run more quietly. Those are the maker's published figures for those models, not a promise about any door in stock, so ask us about the specific door you are considering.
The right choice depends on how the garage is used and what you want to spend. We lay out the options with a free estimate so you can compare them side by side. Our garage door materials guide compares steel, wood, aluminum and other options.
Reading R-value and U-factor on a label
R-value measures resistance to heat flow, so a higher number is better. U-factor measures how much heat passes through, so a lower number is better. They look like opposites, but DASMA's technical data sheet TDS 163 warns they are not reciprocals of each other, so you cannot flip one to get the other.
The difference is in what was measured. DASMA says testing the whole installed door results in a U-factor, while a calculation on the section alone results in an R-value, and that a calculated R-value should not be used for garage door assemblies. A whole-door figure is therefore the more honest comparison.
When you compare doors, check whether the number is for the section or for the whole door. Ask us for the details on any door you like, and we will go over them with you.
| R-value | U-factor | |
|---|---|---|
| What it tells you | Resistance to heat flow | Heat passing through |
| Better is | Higher | Lower |
| Usually measured on | The insulated section (calculated) | The whole installed door (tested) |
| Per DASMA TDS 163 | Calculated value should not be used for garage door assemblies | Result of testing the whole door |

Insulated doors in Northern Nevada weather
Our area is not mild all year: every NOAA station in the valleys we serve counts well over a hundred nights a year at or below freezing, and July afternoons run hot. The station-by-station figures are on our weather data by town page.
That mix of cold winters and hot summers is why we install doors made to handle the challenging weather of the Greater Reno area and all of Northern Nevada. A good seal belongs with the door; see garage door weather seals.
Choosing and installing a new insulated door
Start with a free estimate. A qualified, friendly technician looks at the opening, the headroom, the opener and how you use the space, and then explains the choices: style, material, insulation, windows and color. We install the door, balance it, set the opener and test the safety reverse before we leave. Read about the Wayne Dalton doors we feature on our Wayne Dalton page, or see residential garage doors for the full range. Published price ranges are in our new garage door cost guide.
Where we work
We do this work across the Greater Reno area and Northern Nevada, including Reno, Sparks and Spanish Springs, Carson City, Fernley, Fallon, Incline Village, Minden and Gardnerville, Dayton and the South Shore of Lake Tahoe.
Insulated Garage Doors: Questions
Is an insulated garage door worth it?
It depends on how you use the garage. If it is attached to the house, has a room above it or doubles as a workshop, insulation can be worth it. We go over the choices with you and give a free estimate.
What is the difference between polystyrene and polyurethane?
Polystyrene is rigid foam fitted into the door section. Polyurethane is foamed in place and fills the section. Wayne Dalton's published figures show the gap: R-7.4 for its polystyrene Model 8200 and R-16.22 for its Models 8500/8500AG.
What does R-value mean on a garage door?
R-value is resistance to heat flow, and higher is better. DASMA notes that R-value and U-factor are not reciprocals and that a calculated R-value should not be used for whole garage door assemblies.
Do you install insulated commercial doors?
Yes. We install and repair specialized coiling, sectional, insulated and non-insulated commercial doors.
Do you offer a free estimate on a new door?
Yes. We give free estimates, and we guarantee all our work.
Sources (4)
- DASMA (Door & Access Systems Manufacturers Association): dasma.com/wp-content/uploads/2022/09/TDS163..pdf (checked November 2026)
- NOAA National Centers for Environmental Information: NOAA NCEI U.S. Climate Normals 1991-2020 (annual/seasonal + monthly) (checked November 2026)
- Wayne Dalton: wayne-dalton.com/garage-doors/door-overview (checked November 2026)
- Wayne Dalton: wayne-dalton.com/garage-doors/detail/classic-steel-garage-doors-9100-9605 (checked November 2026)
Contact Us for Quick Job Quotes and More Information.
Call 775-356-0444 or 775-883-0444, or send the form for a free estimate. Emergency and same-day service available 24/7.