Nevada Lic. No. 61031

Free EstimateCall Us Today: 775-356-0444

Advanced OverheadGarage Door Company

Opening a Garage Door in a Power Outage

Springs and safety · 6 min read · Updated November 2026

If the springs are working and the power is out, the opener's emergency release lets you move the door by hand: make sure the door is closed, then pull the release. If a spring or cable is broken, do not pull the release or use the door at all; keep people and cars clear and call Advanced Overhead Garage Door Company at 775-356-0444, where emergency and same-day service is available 24/7.

Key points

  • The emergency release is for doors whose springs are working
  • Never use it with a broken spring or cable
  • Pull it only with the door closed
  • Re-engage the opener after power returns
  • A battery-backup opener avoids the manual release
Three-bay home with white raised-panel garage doors

A power cut does not have to trap a car in the garage, but the manual release is only safe when the rest of the door is in good order. The first step is to work out which situation you are in, and that takes thirty seconds of looking.

Before you pull the cord

The U.S. Consumer Product Safety Commission's garage door sheet (Publication 523) describes using the release with the door closed: make sure the door is closed, then pull the quick release to detach the door from the opener. Before you do, a quick look tells you whether the springs and cables are intact.

A broken spring takes away what is holding the door's weight. Pulling the release on a door in that condition can let it fall or move suddenly. DASMA states that spring systems are dangerous and should be repaired only by trained professionals.

  • Did you hear a loud bang before the outage or before the door stopped?
  • Is there a visible gap in a spring coil, or a cable hanging loose or frayed?
  • Is the door crooked, off its track, or sitting unevenly?
  • Is anyone or any car in the door's path?

If any of these is a yes, do not use the release and do not try to lift the door. Keep people and cars clear and call us.

Opening by hand, safely

If the door looks normal and nothing was broken, the release is a cord with a handle hanging from the trolley that rides on the opener's rail. Pulling it detaches the door from the opener so the door can be moved by its handle.

The CPSC describes a properly operating door as balanced: it stays in place when stopped partly open. If the door feels heavy, will not stay where you leave it, binds or sticks, let it go back down gently, step away and call; the CPSC says a door that is not balanced, or that binds or sticks, should be serviced by a professional.

  1. Make sure everyone, including pets, is clear of the door.
  2. Make sure the door is closed, then pull the release handle once.
  3. Lift the door slowly by its handle, only if it moves easily, and stop at once if it feels heavy.
  4. Keep your fingers away from the joints between panels.
  5. Lower the door fully when you are done; never leave it partly open over people or cars.

Re-connecting the opener

After the power returns, the door needs to be reconnected to the opener. Closing the door first, then following the opener's own manual for reconnecting, is the usual order.

Once reconnected, test the door with the opener and watch it travel. If it does not run smoothly, or the opener hums without moving the door, see our page on an opener that runs but will not move the door. After any manual operation, it is a good moment to run the monthly safety reversal test.

Battery backup

A battery-backup opener is designed to keep running the door on battery power during an outage, so you do not need the manual release. California law, for example, requires that a battery-backup opener stay operational without interruption during an electrical outage.

For context, California has required battery backup on new residential openers since July 1, 2019 (California Health and Safety Code section 19892). That is a California law and not a Nevada rule, but it shows how common the feature has become. If you want one, our LiftMaster opener page and the guide to choosing an opener cover the choices. We are an authorized LiftMaster dealer.

When to call us

Call if the door will not move, feels heavy, drops, or shows broken parts. We repair broken springs and cables, and a qualified, friendly technician gives a free estimate and can often have repairs done in a few hours, depending on where you are. Emergency and same-day service is available 24/7. If the door simply will not open for another reason, start with garage door won't open.

Sources (3)

Related questions

Is it safe to pull the emergency release during a power outage?

Only when the springs and cables are working, and with the door closed. Never use it with a broken spring or cable. If the door is stuck open when the power goes out, leave it, keep clear and call us.

My door feels very heavy when I lift it by hand. Why?

A properly balanced door stays in place when stopped partly open. A heavy door usually points to a spring problem. Let it down carefully, step away, and call for service.

Do I have to reconnect the opener after the power comes back?

Yes. After using the release, the trolley has to be re-engaged so the opener can move the door again. Follow the opener's manual, then watch the door run.

Do battery-backup openers work during an outage?

They are built to keep running the door on battery power, so the manual release is not needed. We install LiftMaster openers as an authorized LiftMaster dealer.

More questions and answers

Contact Us for Quick Job Quotes and More Information.

Call 775-356-0444 or 775-883-0444, or send the form for a free estimate. Emergency and same-day service available 24/7.